01. MOTION-PLUS™ ANTI-FRICTION GREASE

Congratulations on choosing the unique anti-friction, extreme-pressure grease available. The Motion-Plus Anti-Friction grease was specially designed to replace inexpensive greases that are not used in critical environments and do not require rigid specs. This unique formula contains Motion-Plus™ Engine Treatment that offers an increased advantage of wear resistance and high load carrying capacity, under high, constant and intermittent stress. It adheres to metal, extending the life of treated parts and provides protection against wear and extreme pressure.

02. BENEFITS

+ Contains Motion-Plus™ Engine Treatment that reduces friction and increases    metal life.
+ Provides maximum protection against wear & extreme pressure.
+ High adherence on treated metal parts that increases time between lubrications.
+ Saves money in parts and service.
+ Non-corrosive and resists water washout.
+ Very high dropping point of 500°F.
+ Can be used on axles, bearings, chassis fittings, conveyors, pumps, universal    joints, and wheel bearings.
+ Lithium based grease.

03. HOW DOES IT WORK

This grease was designed to protect metal parts subject to friction. It bonds to the metal parts forming a smooth surface that reduces friction, reduces temperature and increases the metal part's life. It's high adherence increases the time between lubrications, saving time, parts, labor and money.

04. F.A.Q.

What are the benefits of the high adherence on the Motion-Plus™ grease?
The Motion-Plus™ grease saves time and money since it does not easily fall off.

Does the high adherence on the Motion-Plus™ grease help in the lubrication?
By having a higher adherence, it sticks firmly to metal parts subject to friction, thus allowing parts not to loose lubrication as rapidly as it occurs with other greases.

How does the high adherence of the Motion-Plus™ grease save time and money?
Since Motion-Plus™ grease does not falls off as easily as others, it allows more time between applications. In addition, the savings will also be reflected in the grease value. For example, using 1Lb of conventional grease for a specific weekly lube job will expend 3 Lb on three weeks. With the Motion-Plus™ grease you will only need 1Lb. every three weeks. (Each lube job must be analyzed individually). Labor and value of grease is three times higher with conventional greases than with the Motion-Plus grease.

How can the adherence of the Motion-Plus™ grease be proven?
Its high adherence can be verified with an "Impact Tester" tool. This test consists in striking heavily (like a hammer) the tested grease to see if it scatters from its original place. Low adherence greases scatters totally by the stroke while the Motion-Plus remains intact.

Why is the Motion-Plus™ an "anti-friction" grease?
The Motion-Plus™ grease has Engine Treatment within its components. This reduces friction on metal parts. The grease adheres to the metal parts forming a smooth surface that reduces friction, prolonging the system's life.

Why is the "anti-friction" feature in the Motion-Plus™ grease so helpful?
When the grease has an "anti-friction" feature, it reduces wear and tear in metal parts. At the same time it lowers maintenance and repair costs. When metal parts do not wear off, they are not replaced so often, bringing savings in parts and labor.

What are the advantages of the water resistance in the Motion-Plus™ grease?
The Motion-Plus™ grease works under extreme conditions of humidity since it does not fall off easily. In addition, it is not contaminated by water. This means it will not loose its lubricating qualities.

Where can the Motion-Plus™ grease be used?
It can be used on any metal part subject to friction, such as bearings, axles, chassis fittings, conveyors, pumps, universal joints, wheel bearings and any other industrial, automotive or commercial area of lubrication that requires an extreme-pressure lubricant.

What are the most important advantages of using the Motion-Plus™ grease?
The most important advantages of using the Motion-Plus™ grease are summed up in two words. MONEY SAVER. Not only in parts and grease, but also in labor and no productive idle machinery.

05. TESTIMONIALS

This grease saves in bearings and time. Our distribution fleet stopped having problems with the chassis fittings.
Justino Reyes,
KONDOR HANDELGESELLSCHAFT INC.

After we started to use Anti-Friction Grease Motion-Plus™, the bearings from our cement mixers stop braking. Definitely the Anti-Friction Grease Motion-Plus reduces friction.
Adalberto Perez,
CENTRAL CONCRETE SUPERMIX

After I began to use Anti-Friction Grease Motion-Plus™, my mechanic stopped calling me to ask for auto parts. This has saved me money and lots of time. The parts those stop breakings down were: chassis fittings, conveyors and ball bearings.
Rudy De La Mora,
CONCRETE READY MIX & PUMPING SERVICE, INC.