01. MOTION-PLUS™ COMBUSTION CHAMBER CLEANER

Motion-Plus™ Combustion Chamber Cleaner is a formula that cleans and removes carbon and residues from the injectors, intake valves, pistons and the whole combustion chamber.
This increases fuel efficiency, power and life in engines. For optimum results, use Motion-Plus™ Fuel Treatment in the fuel tank every oil change.

02. BENEFITS

+ Removes carbon build-up from the combustion chamber.
+ Increases horse power in engines.
+ Reduces fuel consumption.
+ Prevents engine wear and tear generated by carbon residue.
+ Increases engine performance.
+ By applying it thru the intake valve (or the PCV valve), the product works directly    in the combustion chamber.
+ Use it every 12,000 miles (19,200 Kms.) or once a year.
+ Should only be applied by a professional technician.
+ Do not add it to the fuel tank.

03. HOW DOES IT WORK

The Combustion Chamber Cleaner is applied with a special tool directly thru the intake valve (or PCV valve). The product falls in the combustion chamber and aided by the heat generated by the engine explosion, removes the carbon residues formed in the valves, pistons, injectors, etc. These residues are expelled thru the exhaust in the next hours of operation.

04. HOW DOES IT WORK ?
Why should the combustion chamber need to be clean?
The combustion chamber needs to be clean to avoid engine power reduction. If the chamber is kept clean, the engine performs like new for a longer period of time.

How does it save fuel by cleaning the combustion chamber?
By cleaning the combustion chamber, the engine will perform in the up most conditions which represents lower effort and therefore fuel saving.

Why should only a professional technician apply the Combustion Chamber Cleaner?
For the Combustion Chamber Cleaner application, you must have a special tool, and you should have mechanical knowledge.

Why should a Motion-Plus Fuel Treatment accompany the Combustion Chamber Cleaner?
The full service (includes Combustion Chamber Cleaner and Fuel Treatment) allows a total cleaning for the fuel system. From tank thru the conducts, injectors and combustion chamber. By using both products, the cleaning optimizes considerably.

How often you must clean the Combustion Chamber?
The total cleaning should be done once a year or every 12,000 miles (19,200 Kms).

Can you replace with another product the Motion-Plus Fuel Treatment for a complete fuel system cleaning?
No, both products have been manufactured to work jointly. Chemically they form a balance that optimizes the total cleaning.

05. TESTIMONIALS

I use the Motion-Plus™ products in all of my vehicles including my boat and motorcycles and I sell them in my stores because I am sure the products work.
Joe Gallardo,
Owner of 5 SHELL RAPID LUBE Stores.

A Mercury Grand Marquis year 1990 had a missing cylinder due to a dirty injector. After we used the Combustion Chamber Cleaner and we ran the car for about ten to fifteen minutes, the car began working well.
Sergio Castilla,
C & S AUTO REPAIR

One of our customers has a Ford Taurus 1985. The injectors were apparently clogged. We tested the injectors with the tester machine, and we detected that in fact, there was a clogged injector. We added the Motion-Plus™ Combustion Chamber Cleaner and we noticed that the product unclogged the injectors. The engine started working very well.
Mike Cardoza y Julio Ares,
Owners C & C AUTO SERVICES CORP

We found out that Motion-Plus Combustion Chamber Cleaner and Fuel Treatment really work. We added them in my 60.000 miles, year 2000 Dodge Ram 2500 and I got a saving equal to one quarter of the tank.
Eddie Davis,
President INTERNATIONAL AUTO ELECTRIC CORP.